Pressure vessels for desalination plant in Al-Ghubrah

PH Technology provides 17 case for Pall International, bound for the desalination plant in Al- Ghubrah (Oman) awarded to Cadagua in consortium with Malakoff International Limited and Sumitomo Corporation. The consortium is responsible for the design, construction, operation and maintenance of a desalination plant in Oman on a contract worth $ 300 million . Since […]

Supply of «turnkey» plant in Repsol’s Puertollano refinery

As part of a €1.2 million contract with Pall International, with whom they have been working extensively in recent years, PH Technology has completed the design, manufacture and installation of a microfiltration pretreatment plant for the osmosis plant in the refinery operated by Repsol in Puertollano (Ciudad Real). The engineering process was developed by Pall […]

Filter housings

This project involved the manufacture of a set of equipment in FRP and PP/FRP materials for IKRA, a new PVC production plant owned by the Russian-Belgian consortium SIBUR / SOLVIN in Kstovo, Russia. The equipment was manufactured for our client Pall France, and PH Technology was responsible for the mechanical design and manufacture of both […]

Piping system manufactured in PE100 for the extension of a mining facility

Application PH Technology was responsible for the supply, installation and structural support of plastic pipe systems in the context of the proposed expansion of a copper and polymetallic production plant for mining operations in Stained Water. Characteristics The installation amounted to approximately 2100 meters of pipe, ranging from Ø90 to Ø350 in diameter, and the […]

Pressure housings and filter cartridges

The project was for the manufacture of vertical pathway pressure housings in FRPV material, to be used as CIP (Clean-In-Place) filter cartridges. These housings are equipped with internal fixtures in PP-H material (polypropylene homopolymer) for the support of the filter elements, and were installed in a sea water desalination plant in Adelaide, Australia. Design conditions […]

Rectangular ductwork for desulphurisation system

Construction of rectangular FRP ductwork as part of the flue gas desulphurization system in an 80 MW steam turbine. This ducting system replaced the existing metallic system that had been degraded by corrosion. Operating Conditions The design specifications were very demanding, with an operating temperature of 99ºC and an internal pressure of 2000 Pa. In […]

Installation of fire protection system in PE100 material

Application The manufacture, assembly and testing of two separate fire protection rings installed in the combined cycle power plants at Port de Barcelona (owned by Gas Natural) and Besós V (owned by Endesa). Characteristics These underground installations have a principal diameter of Ø315, and a total length of approximately 1800 m. each. The templates for […]

Manufacture of large diameter siphons in PE100

Application Manufacture of sections pf pipework in PE100 for the installation of syphons under the new Madrid-Lisbon AVE line. Characteristics Five syphons were constructed to carry irrigation water from one side of the line to the other, consisting of PE piping inside a concrete sleeve. The diameters used were Ø1400, Ø1200 and Ø710 in a […]

Cooling system for diesel groups

Application In this project an existing cooling system in A°C° material at the Melilla diesel plant was replaced with a new system in GRP and PE100 materials. Characteristics Construction of a complete cooling system (supply and return), consisting of two lines of diameter DN700 (FRP system) and DN800 (PE100 system). The FRP material was used […]

Pipping system for desulphuration plant

Application Construction of an absorber and associated feed system in FRP material for a desulphurization plant for a coal-fired power station. Characteristics The principal diameter of the pipes was DN1200. PH Technology was responsible for the installation of the feeder pipes to the absorber, and of the distribution ramps in its interior. Operating Conditions The […]

Pipping system in combined cycle power plant

Application In this project, PH Technology was responsible for the supply and installation, including support structures, of a variety of piping systems in plastic. The choice of material was determined by the particulars of each of the piping systems. Characteristics The various piping systems were both above and below ground. The circulating water and cooling […]